Welcome to the January 2022 Mama Elephant Release Blog Hop!
Today I am sharing two flat shaker cards featuring new stamps and dies from the January 2022 Release.
Affiliate links are used throughout this post at no additional cost to you. This allows me to keep bringing you content. Thank you all for your support!
V I D E O T U T O R I A L
Watch the creation of these flat shaker cards from start to finish below or click HERE to watch in HD:
More supplies linked in the supply list at the bottom of this post
The Mama Elephant Mod Hearts uneven frame and large mod heart were die cut from smooth white cardstock to make shaker frames.
Hero Arts Peony Cardstock was die cut with a Mama Elephant B2B Rectangles to fit behind the frame.The cardstock was wrapped with recycled stamp packaging on three sides, filled with shaker confetti, and sealed shut on the fourth side as shown in the video.
Below you will find links to the supplies used to create this project(s). Click the thumbnails to start shopping. Where available I use compensated affiliate links at no extra cost to you. Your support helps me to keep bringing you new projects and videos. Thank you!
Hello weekend! Love is in the air and there's a brand new @prettypinkposh Valentine's Day release now available! Today I'm sharing a couple of flat shaker cards featuring the brand new Love Hearts Die and greetings from the Valentine Wreath Stamp Set. With just a few color changes these products can go from Valentine's to another occasion so easily! And the best part? These are FLAT shakers! No bulky foam tape needed!
Affiliate links are used throughout this post at no additional cost to you. This allows me to keep bringing you content. Thank you all for your support!
V I D E O T U T O R I A L
Watch the creation of these flat shaker cards from start to finish below or click HERE to watch in HD:
More supplies linked in the supply list at the bottom of this post
The Pretty Pink Posh Love Hearts was die cut from smooth white cardstock and colored the images with the following Copic Markers:
Red Flowers/Hearts: R30, R32, R35, R37
Leaves: G00, G02, G09
A scant 4 1/4" x 5 1/2" smooth white panel was inked with Pawsitively Saturated Inks in Cheeky, Blush, and Pucker. Leftover packaging was trimmed approximately 3/4" larger than the panel and secured on 3 sides, leaving one side open to fill with shaker bits. I filled this shaker with Hero Arts Icicle Glitter and Honey Bee Stamps Tiny Red Confetti Hearts. I sealed up the fourth side of the shaker and adhered the frame to the flat shaker as shown.
A sentiment from the Pretty Pink Posh Valentine Wreath Stamp Set was stamped on one of the hearts with clear embossing ink and heat embossed with white embossing powder. Another greeting from the stamp set was stamped on smooth white cardstock with Pucker Ink, die cut with the coordinating Pretty Pink Posh Valentine Wreath Die, and adhered to the other heart as shown.
The design was finished with Nuvo Crystal Drops in Glossy White in the flower centers and some Lucy's Little Things Hearts Droplets in Coral and Poppy.
More supplies linked in the supply list at the bottom of this post
The Pretty Pink Posh Love Hearts was die cut from smooth white cardstock and colored the images with the following Copic Markers:
Purple Flowers/Hearts: BV31, BV34, BV39
Leaves: BG90, BG93, BG96
A scant 4 1/4" x 5 1/2" smooth white panel was inked with Simon Says Stamp Dusty Sage and Seafoam Dye Inks.. Leftover packaging was trimmed approximately 3/4" larger than the panel and secured on 3 sides, leaving one side open to fill with shaker bits. I filled this shaker with Hero Arts Icicle Glitter and Lucy's Little Things Sprinkles Hearts in Purple. I sealed up the fourth side of the shaker and adhered the frame to the flat shaker as shown.
The design was finished with Nuvo Crystal Drops in Silver Lining in the flower centers and some Lucy's Little Things Hearts Droplets in Lilac.
S U P P L I E S
Below you will find links to the supplies used to create this project(s). Click the icon for the store underneath the thumbnails to start shopping. Where available I use compensated affiliate links at no extra cost to you. Your support helps me to keep bringing you new projects and videos. Thank you!
Welcome to the Pinkfresh Studio November Essentials Release Blog Hop!
Today I am sharing two shaker cards and two shaker tags using new dies from the November Essentials Release and lots of previously released Pinkfresh stamps, dies, foil plates, and stencils!
Affiliate links are used throughout this post at no additional cost to you. This allows me to keep bringing you content. Thank you all for your support!
V I D E O T U T O R I A L
Watch the creation of these shaker cards and tags from start to finish below or click HERE to watch in HD:
The back of the shaker was framed up with foam adhesive to make each window it's own shaker. The shaker wells were filled with heart confetti in three different colors! (The heart Confetti is older Honey Bee Stamps from my stash).
The Pinkfresh Studio Joyful Bouquet Die was used to die cut the florals. I love how one stamp, stencils, and die give you so many pieces for multiple cards. The florals were popped up with foam adhesive.
The panel was backed with a piece of acetate. A greeting from the Pinkfresh Studio Heartfelt Thanks Stamp Set was stamped on the acetate window with Cotton White StazOn Ink.
The back of the shaker was framed up with foam adhesive to make a shaker. The shaker wells was filled with heart confetti and other sequins.
Greetings from the Pinkfresh Studio Thrill of Hope Stamp Set were stamped on the bottom of each tag with clear embossing ink and heat embossed with Antique Gold Embossing Powder and Silver Embossing Powder.
The shaker window was backed with a small piece of acetate and star confetti was placed over the window. Double Sided Adhesive was placed around the tag to frame up the flat shaker.
The tag toppers were adhered to the top of each tag.
Below you will find links to the supplies used to create this project(s). Click the icon for the store underneath the thumbnails to start shopping. Where available I use compensated affiliate links at no extra cost to you. Your support helps me to keep bringing you new projects and videos. Thank you!
Welcome to the November 2021 Mama Elephant Release Blog Hop!
Today I am sharing this thank you owls shaker card featuring new stamps and dies from the November 2021 Release.
Affiliate links are used throughout this post at no additional cost to you. This allows me to keep bringing you content. Thank you all for your support!
V I D E O T U T O R I A L
Watch the creation of this thank you owls shaker card from start to finish below or click HERE to watch in HD:
The shaker was framed with foam adhesive and filled with Honey Bee Stamps Jack Frost Sequin Mix. The back of the shaker is a trimmed 4 1/4" x 5 1/2" panel of Whimsy Stamps Flurries Patterned Paper.
The card front was finished with a scattering of tiny silver star confetti, clay snowflakes, and heart droplets.
S U P P L I E S
Below you will find links to the supplies used to create this project(s). Click the thumbnails to start shopping. Where available I use compensated affiliate links at no extra cost to you. Your support helps me to keep bringing you new projects and videos. Thank you!
Welcome to Day 1 of my Handmade Holiday 2021 Series!
I'm back with my eighth year of handmade holiday ideas!
Thank you so much for your support of this series. I appreciate each and every one of you and y'all make this possible. Much love to everyone.
The goal of this series is adding handmade touches to gifts for our friends and family. Even with the craziness of the season I like to be able to personalize the gifts under our tree. I'll be sharing ideas for cards, tags and gift wrapping sure to add that handmade touch we all love. Most ideas will include multiples (today I created 6 hexagon shaped shaped shaker gift tags)!
Each Handmade Holiday project blog post will feature a brand new, never before seen project(s) plus an incredible giveaway from.... me!
Affiliate links are used throughout this post at no additional cost to you. By shopping with my links, you allow me to keep bringing you content. Thank you all for your support!
V I D E O T U T O R I A L
Watch the creation of these six hexagon shaker gift tags from start to finish below or click HERE to watch in HD:
Scene Tag (3 die cut from smooth white cardstock using the snow bank Mama Elephant Hexatags die.)
For the gnomes scene tag the Mama Elephant Oh Gnomie Tree Stamp Set were stamped on smooth white cardstock with LF Jet Black Ink and colored in with the following Copic Markers:
were stamped on smooth white cardstock with LF Jet Black Ink and colored in with the following Copic Markers:
The shaker tag was assembled as shown in the video and finished with Red Sparkle Lawn Trimmings Twine. A heart accent was used to embellish the tag.
For the penguins snowflakes tags the Mama Elephant Penguins Go Shaking Stamp Set were stamped on smooth white cardstock with LF Jet Black Ink and colored in with the following Copic Markers:
The shaker tag was assembled as shown in the video and finished with Black Lawn Trimmings Twine. A penguin was adhered to the center of the snowflake and a heart accent was used to embellish the tag.
S U P P L I E S
Below you will find links to the supplies used to create this project(s). Click the icon for the store underneath the thumbnails to start shopping. Where available I use compensated affiliate links at no extra cost to you. Your support helps me to keep bringing you new projects and videos. Thank you!
Please leave a comment on this post by November 15, 2021, 11:59 pm CST for a chance to win a Tim Holtz Distress Holiday Bundle (currently SOLD OUT for the season).
IN ORDER TO BE CONSIDERED FOR THIS GIVEAWAY:
→ Subscribe to my email newsletter HERE (or over in the sidebar). ←
Happy Tuesday, friends! Today I am sharing this sweet treat shaker card featuring new products from the Mama Elephant October 2021 Release! This sweet shaker card is sure to bring a smile to anyone's day!
Affiliate links are used throughout this post at no additional cost to you. This allows me to keep bringing you content. Thank you all for your support!
V I D E O T U T O R I A L
Watch the creation of this sweet treats shaker card from start to finish below or click HERE to watch in HD:
A sentiment from the Mama Elephant Sweet Treats Stamp Set was stamped on the acetate with Cotton White StazOn Ink. Foam adhesive was placed around the frame, the shaker was filled with Sprinkles Unicorn Crush Confetti, and the inked shaker was adhered to the back as shown.
The card was finished with a scattering of heart accents.
S U P P L I E S
Below you will find links to the supplies used to create this project(s). Click the thumbnails to start shopping. Where available I use compensated affiliate links at no extra cost to you. Your support helps me to keep bringing you new projects and videos. Thank you!
Welcome to Waffle Flower’s October 2021 Release Day!
I’m happy to be hopping with the folks from Waffle Flower to show you all the fun new stuff! This month, we’re bringing you fun shaker card supplies along with new additions to our oversized word series!
Affiliate links are used throughout this post at no additional cost to you. This allows me to keep bringing you content. Thank you all for your support!
V I D E O T U T O R I A L
Watch the creation of these shaker cards from start to finish below or click HERE to watch in HD:
The sun from the Waffle Flower Solar System Dies was die cut from smooth white cardstock and inked with Fossilized Amber and Wild Honey Distress Oxide Inks. The sun was glued in place around the circluar opening in the background.
The Waffle Flower Shaker Cover Puffy Circles was placed in the opening and secured with liquid glue. The shaker was filled with a mix of yellow and orange sequins.
A 4 1/4" x 5 1/2" smooth white panel was inked with Wild Honey Distress Oxide Ink. The panel was secured to the back of the sun panel to finish the shaker.
The face from the Waffle Flower Solar System Sentiments Stamp Set was die cut from LF Black Licorice Cardstock and smooth white cardstock and adhered to the shaker dome as shown. The eyes were finished with a layer of Glossy Accents.
The card was finished with a red heart under the sentiment, a scattering of gold star confetti and shooting stars confetti!
More supplies linked in the supply list at the bottom of this post
A Waffle Flower Slim Shaker Circles Die was die cut from a 4 1/4" x 5 1/2" panel of smooth white cardstock and inked with Distress Oxide Inks in Wilted Violet, Prize Ribbon, and Black Soot. I love these colors for a galaxy sky! The background was spritzed with water from a Distress Sprayer and blotted dry with a paper towel.
The card was finished with a white heart under the sentiment and a scattering of shooting stars confetti!
S U P P L I E S
Below you will find links to the supplies used to create this project(s). Click the thumbnails to start shopping. Where available I use compensated affiliate links at no extra cost to you. Your support helps me to keep bringing you new projects and videos. Thank you!
For today’s hop, Waffle Flower is giving away $25 gift certificate to THREE lucky winners. You can leave a comment on this blog and along the hop by 11:59pm EDT on Monday October 18th, 2021 for your chances to win. Winners will be chosen at random from the comments left on any of the posts in this blog hop and will be announced on the Waffle Flower Blog on Friday 10/20/2021.
There are more giveaways to enter on Instagram including 1 winner to receive the entire release! Follow us at @waffleflowercrafts so you don’t miss out!
Happy Wednesday everyone! We are celebrating one of the sponsors of Simon Says Stamp STAMPtember 2021, Cleary Besotted! The exclusive, limited edition set for STAMPtember 2021 is, Magical Christmas! I created this super fun shaker card using the stamps from the set and some dies from my stash. Let's make a shaker!
Affiliate links are used throughout this post at no additional cost to you. This allows me to keep bringing you content. Thank you all for your support!
V I D E O T U T O R I A L
Watch the creation of this magical Christmas Shaker card from start to finish below or click HERE to watch in HD:
On the back of the panel, foam adhesive was adhered around the shaker frame and the shaker was filled with iridescent star confetti. The backing was adhered to the frame.
The images were fussy cut and adhered to the scene as shown.
Glossy Accents was added to the ornament, unicorn horns, lights, and candy cane. Black gel pen was added to the eyes and white gel pen was added for highlights. A heart accent was added below the sentiment to finish the design.
S U P P L I E S
Below you will find links to the supplies used to create this project(s). Click the thumbnails to start shopping. Where available I use compensated affiliate links at no extra cost to you. Your support helps me to keep bringing you new projects and videos. Thank you!
Affiliate links are used throughout this post at no additional cost to you. This allows me to keep bringing you content. Thank you all for your support!
V I D E O T U T O R I A L
Watch the creation of these toadally unfroggetable shaker cards from start to finish below or click HERE to watch in HD:
More supplies linked in the supply list at the bottom of this post
For the front panel of the card, the Hero Arts Mushroom Forest Fancy Die was die cut from a 4 1/4" x 5 1/2" panel of smooth white cardstock (included in the kit). The frame was colored with the following Copic Markers:
The frog was adhered into the scene in the front of the shaker window as shown. Google Eyes (included in the kit) were added to the frog for a fun touch! The frame was backed with thin foam adhesive strips (included in the kit), forming a frame and filled with Trinity Stamps From Embellishments (included in kit). A Photoplay Custom 6x6 patterned paper (included in the kit) was trimmed down to 4 1/4" x 5 1/2" and adhered to the frame for a patterned background to the shaker!
More supplies linked in the supply list at the bottom of this post
For the front panel of the card, the Hero Arts Through The Woods Window was die cut from a 4 1/4" x 5 1/2" panel of smooth white cardstock (included in the kit). The frame was colored with the following Copic Markers:
Additional images from the stamp set were stamped around the frame and colored in with Copic Markers.
The frog was adhered into the scene in the front of the shaker window as shown. Google Eyes (included in the kit) were added to the frog for a fun touch! The frame was backed with thin foam adhesive strips (included in the kit), forming a frame and filled with Trinity Stamps From Embellishments (included in kit). A Photoplay Custom 6x6 patterned paper (included in the kit) was trimmed down to 4 1/4" x 5 1/2" and adhered to the frame for a patterned background to the shaker!
S U P P L I E S
Below you will find links to the supplies used to create this project(s). Click the thumbnails to start shopping. Where available I use compensated affiliate links at no extra cost to you. Your support helps me to keep bringing you new projects and videos. Thank you!
Happy Saturday! Sorry for the long absence on my blog and YouTube Channel! I promise I've been working and I've got some incredible projects coming that I can't wait to show you, including these 10 toner printed foiled card designs! My cards today all started with the Cozy Vibes Acetate Sheets included in the November 2020 Card Kit of the Month (and available for individual purchase). I wanted to foil the sheets with the Autumn Deco Foil also included in the November Kit.
V I D E O T U T O R I A L
Watch the creation of these toner printed foiled cards from start to finish below or click HERE to watch in HD:
Nuvo Crystal Drops in Ebony Black and Dark Walnut were added to the eyes and noses of the cute foiled critters!
THANKFUL FOR YOU CARD
The Thanks and Leaves Acetate Sheet was foiled with Autumn Deco Foil in Rose Gold.
The foiled panel was adhered over a stamped Reverse Crackle Background I had leftover from another project! I love when I can make use of the odds and ends I have lying around!
White cardstock was die cut with a Drifting Stitches Border Die and a border was adhered to the top of the acetate panel and one to the bottom. Foam adhesive was placed behind the white cardstock areas so the panel could be "popper up" over the snowflakes.
A frame for the shaker was die cut from another Honey Bee Stamps Holiday Traditions patterned paper using a Lawn Fawn Stitched Rectangle Frame Die. The acetate panel was adhered to the back of the frame and then a layer of foam adhesive was placed around the back of the frame. The shaker was filled with snowflakes and then backed with the evergreen patterned paper.
Below you will find links to the supplies used to create this project(s). Click the icon for the store underneath the thumbnails to start shopping. Where available I use compensated affiliate links at no extra cost to you. Your support helps me to keep bringing you new projects and videos. Thank you!
